We will clean anyone's R6 carburetors for $95.00 plus parts. This price is good all year around!!!!!!

 

 

     

CARBURETOR CONVERSIONS

 

CARBURETOR PARTS

 
FUEL DELIVERY PARTS
 
HOT NEW ITEMS
 
PERFORMANCE ACCESSORIES
 
TECHNICAL INFORMATION
 
Chassis Dyno
 
CONTACT US
 
Parts Videos
 
Engine Parts
 
Engine Rebuild Kits
 
ENGLER FUEL INJECTION
 
IG Controller

Become our friend on on Facebook!

First name ODUM

Last name Specialties

 

TECHNICAL INFORMATION

__________________________________________________________

1999 to 2002 R6 Ignition Wiring

 

Six Wire CDI Connector

(Note: Wire colors for single CDI connector are same)

Red/black         Key power (battery positive)

Brown/black     Key power (battery positive)

Gray                 Coil 2 & 3

Black                 Ground

White                 Not used

Orange             Coil 1 & 4

 

Eight Wire CDI Connector

White/red         Ignition pickup

Blue                 TPS Sensor

Yellow/black     Tach Lead for stock Tach.

                          (Most tachs will not work on this wire without connecting it to 12 volts through a 2.2k resistor) Most data loggers use this lead

Sky blue             Not used

Yellow             TPS Sensor

Blue/red             Not used

Blue/black         Ground

Black/blue         Ignition pickup and TPS Sensor

 

Coils

Ground the black wires

Starter solenoid

Blue/white         Battery Positive

Red/white         Starter button then to Ground

 

Voltage Regulator

Red             Positive side of battery

Black         A good ground

__________________________________________________________

Click on photo for a 1999-2002 wiring diagram

Photo Complements of:

Michael Mc Water of Choctaw, OK

__________________________________________________________________

2003 and 2004 R-6 Wiring


CUT DO NOT USE
LT GREEN
YELLOW/WHITE

YELLOW/BLUE
GREEN/YELLOW


YELLOW/BLACK 
Tach Lead for stock Tach.

                          (Most tachs will not work on this wire without connecting it to 12 volts through a 2.2k resistor) Most data loggers use this lead

BATTERY POSITIVE
RED/WHITE
RED/BLUE     (ALSO TO INJECTORS)
WHITE

GROUND
BLUE/WHITE
BLACK/YELLOW
BLUE/BLACK
BLACK WIRES ON COILS
BLACK/WHITE
BLACK (BOTH)

GRAY                         IGNITION PICKUP
BLACK/BLUE             ALL SENSORS
BLUE                          TO ALL SENSORS
WHITE/BLACK          CAM SENSOR
YELLOW                     TPS
BROWN/WHITE         AIR TEMP SENSOR
GREEN/WHITE          COOLANT TEMP SENSOR
PURPLE/WHITE         MAP SENSOR
YELLOW/GREEN       LAY DOWN SWITCH
PURPLE                       BARO SENSOR
WHITE/YELLOW        SPEED SENSOR

COILS
ORANGE
GRAY/RED
ORANGE/GREEN
GRAY/GREEN

INJECTORS
RED/BLACK
GREEN/BLACK
BLUE/BLACK
ORANGE/BLACK


BROWN/RED                     AIR SOLENOID
TWO YELLOW/RED         WIRES LOOPS TO EACH OTHER